WHEEL DESCRIPTION
Front/Rear: 19x10.5 (20.7lb)
Confirmed to clear the following brakes
MPP 365mm Silver Caliper relocation kit
MPP Stoptech ST-60 368 and 380mm kits
AP Racing 372mm and 380mm kits
UP BFB kit
Recommended Tire size:
275/35/19 to 305/30/19
Special Notes:
1. Highly recommend extended studs for the front axles so you can
use hub centric slip on spacers to dial in the perfect backspacing for
your specific rotor setup.
2. Spacers will be needed to provide clearance to the front upright only.
Fitment Guidelines: Only needed for front axles. Perfect fitment for rear.
1. OEM 2 piece rotors on Performance Model
3's will need to purchase the Aspira 10mm spacer, extended shank or
slip on, netting a +23 ET due to the thinner OEM 2 piece rotor hat.
Recommended Front camber -3 to -3.5. Extended studs are recommended for the front axles.
2. Most other aftermarket BBK's and non oem 2 piece rotors can
purchase the Aspira 5mm slip spacer. Extended studs are recommended for
the front axles. Net +28 ET.
3. Alignment, Front Camber -3 to -3.5, Rear Camber -2.5 to -2.7.
OEM Centercaps are not included. Model S and X caps will fit.