HEMI UP. Presenting The Best Sounding Exhausts on the Planet™ for the ‘15+ Dodge Charger 392/Hellcat:
Touring Edition Exhaust
The Touring Edition is a full 3” straight-through
stainless steel catback configuration capable of delivering optimal
power while remaining drone-free throughout the entire rev range.
Featuring a precision-engineered H-pipe and AWE’s patented
drone-canceling solution, 180 Technology®, the Touring Edition delivers deep, rich exhaust notes that coax you to redline.
Catering to the feigns of big power, the Touring
Edition features engineered provisions to accommodate larger, high
performance driveshafts and differentials.
Sound Perfection: AWE 180 Technology™
Perfect tone, compliments of AWE 180 Technology®.
As exhaust gases exit the Hemi engine and flow into an AWE 180 Technology®
equipped resonator, they pass through strategically located ports, and
into reflection chambers. Sound waves, carried by these exhaust gasses,
bounce off the walls of the reflection chambers. By controlling the size
and location of the ports and the chambers, we also control when the
sound waves exit the chambers. The specific timing of when the reflected
sound waves rejoin the main exhaust flow creates a
one-hundred-and-eighty-degree out-of-phase sound wave that cancels out
problematic frequencies. More on AWE 180 Technology® in the tab above.
Important fitment notes:
The Touring Edition Exhaust is available as
non-resonated or resonated. We recommend the non-resonated variant for
vehicles equipped with the factory headers. If your Charger is equipped
with aftermarket headers, we recommend going resonated. Have stock
headers but planning to go aftermarket later? No worries, you can swap
in the resonated mid sections with ease via an AWE Resonator Conversion
Kit. Hit us here if you’re in need of this conversion kit.
Conversion kits:
We made it easy to convert between Track and Touring Editions if you decide at a later date to change your volume.
Tip Options
The Touring and Track Edition Exhausts are available
with 4.5" double-walled slash-cut tips in either diamond black or chrome
silver